Start Prompt Here?

Sep 18, 2008
1
0
I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.
 

Charles Dye

Super Moderator
Staff member
May 20, 2008
4,494
91
Albuquerque, NM
prospero.unm.edu
There should be batch files named "tcchere.btm" and "tcmdhere.btm" in your Take Command directory.

I'm not very familiar with Vista, but I suspect that you may have to run them as administrator for them to function correctly.
 
May 31, 2008
26
0
On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:


>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.

In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
that install the right click options for you: tcchere.btm and
tcmdhere.btm.
 
May 31, 2008
26
0
On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:


>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.

In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
that install the right click options for you: tcchere.btm and
tcmdhere.btm.
 
May 31, 2008
26
0
On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:


>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.

In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
that install the right click options for you: tcchere.btm and
tcmdhere.btm.
 
May 31, 2008
26
0
On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:


>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.

In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
that install the right click options for you: tcchere.btm and
tcmdhere.btm.
 
May 31, 2008
26
0
On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:


>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.

In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
that install the right click options for you: tcchere.btm and
tcmdhere.btm.
 
May 20, 2008
3,515
4
Elkridge, MD, USA
JP Software Forums" <neil@jpsoft.com>; "rclott wrote:
| I can't find this addressed in the forums. When I used 4NT before in
| WinXP, there was an option when I would right-click on a folder from
| Windows that said "4NT Prompt Here". Is there some method to enable
| this option with Take Command within Vista? I have Take Command 9.02
| and Vista Ultimate with SP1. -Chris.

The batch files to install the feature are part of the TCMD distribution.
They are in the directory where TCMD is installed. I do not use them, nor do
I use Vista, but I keep them around anyway.
--
Steve
 
May 20, 2008
603
0
Sammamish, WA
I don't have my computer in front of me just now, but I believe there
is a batch file in the install folder that will enable the feature.

Sent from Cookie's iPhone

On Sep 19, 2008, at 20:18, "JP Software Forums" <neil@jpsoft.com> wrote:


> I can't find this addressed in the forums. When I used 4NT before in
> WinXP, there was an option when I would right-click on a folder from
> Windows that said "4NT Prompt Here". Is there some method to enable
> this option with Take Command within Vista? I have Take Command 9.02
> and Vista Ultimate with SP1. -Chris.
>
>
 
May 20, 2008
11,534
103
Syracuse, NY, USA
On Mon, 22 Sep 2008 22:18:28 -0500, Stephen Worthington <>
wrote:


>On Fri, 19 Sep 2008 22:18:56 -0500, you wrote:
>
>
>
>I can't find this addressed in the forums. When I used 4NT before in WinXP, there was an option when I would right-click on a folder from Windows that said "4NT Prompt Here". Is there some method to enable this option with Take Command within Vista? I have Take Command 9.02 and Vista Ultimate with SP1. -Chris.
>
>
>In your \Program Files\JPSoft\TCMD9 directory, there are *.btm files
>that install the right click options for you: tcchere.btm and
>tcmdhere.btm.

That's nice ... five of the same email.
 
Similar threads
Thread starter Title Forum Replies Date
J Take command does not start on Windows 10 Support 3
N for start /b anamoly Support 1
U Can not get/start Take Command gui Support 1
DrusTheAxe START /? is incomplete Support 2
S How to? Runs start /w in invisible mode OR run program after exit of another one Support 3
vefatica Start/stop screensaver from TCC? Support 12
S START with title Support 4
vefatica START at 0,0? Support 2
D START /POS versus @WINPOS and @WINSIZE Support 12
vefatica START /elevated and PcaSvc? Support 5
S incorrect message at start Cancel batch job 4START.bat ? (Y/N/A) : Support 1
vefatica START /PGM "name with spaces.URL" fails Support 2
L Peculiarities of how START launches processes Support 15
R How to? START program as top window? Support 2
Peter Murschall v24 IDE/BDEBUGGER won't start Support 9
Dmitry L. Kobyakov WAD Start /pgm "name.htm" works improperly Support 4
Joe Caverly START Dialog usage of %_ variables Support 0
A Fixed [23.0.22]: TCMD crashes shortly after start, TCC keeps running in background Support 6
kb6ojs Want to start TCMD v20 with every Windows 10 bootup Support 3
vefatica START *command Support 5
Per TCC/LE 14 64-bit won't start on Windows 10 Insider Preview 17063 (171213) Support 12
A Fixed (CMD compat) START /D fails to recognize the switch option. Support 3
MikeBaas start /runas - I'd like /netonly Support 2
vefatica Start VIEW with the toolbar showing? Support 5
vefatica Documentation START /AFFINITY Support 0
B how to do in "start" command thing like in tcc.exe Support 1
J directory or folder to start in Support 2
R How to? Not have RT version show on start Support 3
D WAD START /ELEVATED "Title" /PGM "job.btm" Support 6
J How to? Start TCMD with different configurations Support 3
vefatica START /K ... Support 1
vefatica Documentation START /AFFINITY Support 5
vefatica Start TCMD with File Explorer showing? Support 2
Alpengreis WAD Each start/close of TCMD changes my Explorer setting Support 7
WadeHatler Just started getting a message about Cloud Storage every time I start TCC 19 Support 3
Alpengreis Fixed TCMD FileExplorer Start-Directory problem Support 4
vefatica Shortcut/start-up folder nonsense Support 20
fishman@panix.com Can I start TCC in full screen mode? Support 9
R Unable to start any BTM file from Explorer Support 5
fpefpe How to? Stange start up issue Support 1
M Start "/Elevated" failure... Support 3
vefatica START, CMD vs. TCC Support 0
Steve Pitts Difference in exection with and without START Support 24
rjperrella start /tabna leaves blank windows when running batch scripts Support 10
vefatica Start-up directory for new tabs? Support 7
C OT: Registry OPEN verb to start elevated... Support 2
tmaynard Error on Take Command Start after recent update Support 2
M How to? Start a program on log on elevated abovenormal Support 5
M How to? Start the version of Take Command that I want... Support 7
C 'start tcmd.exe' actually starts tcc.exe Support 7

Similar threads